• 2910 East 15th Street, Tulsa, OK 74104
  • Visit us on Facebook

LAWN/GARDEN EQUIPMENT

GRINDER, STUMP 31-38 HP ON TRACKS

Where to find GRINDER, STUMP 31-38 HP ON TRACKS in Tulsa

Image for reference only
Actual item may look different
Click on image for larger view

Click on above thumbnails for alternate view

4 Hour: $189.00
Daily: $297.00
Weekly: $1,622.00
Monthly: $6,489.00
Comments:
  • ABC EQUIPMENT RENTAL STOCKS 2 MANUFACTURERS OF TRACK STUMP GRINDERS, WE STOCK BANDIT AND BARRETO, BOTH ARE VERY SIMILAR BUT PLEASE READ BELOW FOR ANY DIFFERENCES BETWEEN THEM
  • BANDIT SG-40 TRACK STUMP GRINDER 38 HORSE POWER
  • The Bandit SG-40 is a compact stump grinder equipped with a Kohler 38 horsepower gas engine. Don't let the size of this machine fool you as it is fully capable of grinding larger diameter stumps. The 18 inch diameter cutterwheel is belt driven and with a swing of 47 inches stumps are eliminated quickly and efficiently. With a max travel speed of over 2.5 MPH you can get from stump to stump in no time at all.
  • Controls are mounted at the rear of the machine on a pivoting console, so no matter the position of the stump, you ll be able to get an excellent view of the grinding action. Control levers and instrumentation, including service points, have been designed with consideration for good, proper ergonomics that make the SG-40 a pleasure to run.
  • SPECS FOR BANDIT
  • Weight 1600 lbs
  • Width 29.50 in
  • Height 48 in
  • Length 100.50 in
  • Fuel Tank 7 gl
  • Hydraulic Tank 7 gl
  • Power 38 hp
  • Cutting Swing 47 in
  • Cutting Depth 12 in
  • Cutting Height 22 in
  • BARRETO STUMP GRINDER
  • The 30SG stump grinder features a time-tested track drive platform. The 30SG has a hydraulically-driven cutter wheel that is raised and lowered into the stump and then moved from side to side to cut down. The 30SG is powered by a 31hp Briggs & Stratton Vanguard V-Twin engine. The engine is coupled to two gear pumps: the larger gear pump drives the cutter wheel and the smaller pump works the tilt and swing cylinders. The tracks are driven by independent hydrostatic pumps mounted on the rear of the engine for easy access and simple linkage control. Counterbalance valves on each track drive prevent the track motors from slipping while the cutter wheel is engaged in the cutting process, even while operating on a slope.
  • CONTROLS
  • The cutter wheel operation and articulating arm are operated by controls mounted on the console. The cutter wheel is activated by a switch on the control stick and has a secondary safety switch to prevent accidental engagement. Back and forth movement across the stump, as well as depth of cut, are easily controlled by handles on the console, allowing for carefully controlled movement of the cutter wheel as it reduces the stump to chips.
  • SPECIFICATIONS FOR BARRETO
  • ENGINE: GASOLINE
  • Briggs & Stratton Vanguard V-Twin 31hp
  • SPECS FOR BARRETO
  • Weight: 1,700 lb
  • Height: 49.5
  • Length (head to side): 79
  • Length (head straight): 98
  • Width: 35.5
  • Gas Tank Capacity: 5 gallon
  • Hydraulic Reservoir: 14 gallons
  • Hydraulic Flow to Head: 13.3gpm
  • Track Width: 7.1
  • Total Ground Contact: 470 sq. in.
  • Ground Drive Forward: 290 ft/min
  • Ground Drive Reverse: 180 ft/min
  • CUTTER WHEEL SPECIFICATIONS
  • Cutting Wheel: 19.2 diameter to tooth
  • Cutting Teeth: 0.750 thick, 16 green teeth
  • Cutting Depth: 12
  • Cutting Height: 32
  • Head Swing: 134 , 99.7 arc

* Please call us with any questions about our grinder stump 31 38 hp on tracks rentals in Tulsa OK and neighboring communities in Northeastern Oklahoma.