DRILLS

DRILL, HILTI CORE-W/VAC. PUMP


	Image for reference only Actual item may look different Click on image for larger view

Manufacturer: HILTI

Model: DD 250

4 Hour: $115.00

Daily: $195.00

Weekly: $649.00

Monthly: $1,664.00

Instructions: <Click Here>

Quantity: for a period of
4 hour(s) day(s) week(s) month(s)

Additional Information

HILTI DD 250 (must use water when operating this drill with diamond core drill bits)
Heavy-duty diamond drilling system for rig-based coring in a very wide diameter range of 1/2"- 12" drill bit can be operated with this drill. This drill can drill larger holes but max for what ABC EQUIP RENTAL allows it to be rented and used with is up to 12" because there are adapters and other tools needed for anything over 12". Plus for drilling larger than 12" operators should be veteran operators. Rental includes, DD 250 Drill, Stand w/vacuum baseplate (if needed vacuum baseplate does remove to anchor with bolt....if needed we do sell the correct type of bolt.), Vacuum pump, a plastic bit washer, and if needed a water hose connector. Rental does not include diamond core drill bit.
Technical Data
Wet/use with water operation
Drilling range: Rig-based wet: 1/2-17-11/16 in
Rotation speed gear 1 under no load: 240 rpm
Rotation speed gear 2 under no load: 580 rpm
Rotation speed gear 3 under no load: 1160 rpm
Chuck type: BS
Number of gears: 4
Weight of complete system: 81 lb.
Mains Frequency: 50/60 Hz
Pulls 20 AMPS on drill motor (If generator is needed 6000W with the 30 amp outlet. Customer may need our cord that fits the twist lock 30 AMP outlet). In addition, the vacuum pump pulls 3.0 AMPS.
A-weighted emission sound pressure level: 93 dB (A) 1
Service indicator: Yes
GFCI ground fault interrupter: Yes
Corner accessibility: 2 in
Wall accessibility: 1.8 in
Features & Applications
Features
Air-cooled, heavy-duty drive unit with four-speed gearing and convenient controls
Hole-starting function for large-sized core bits
Enhanced real-time user-machine communication through digital display: digital spirit level, gear selector, power control function, trip counter, running time counter, easily understood service messages
Unmatched, extremely wide range of applications
Applications
Penetrations for ducts, pipes and cables
Openings for ventilation
Blind holes for setting anchors or post-installed rebar
Coring holes in ceilings, walls and floors without hammering and vibration
Stitch drilling for breaches
Proper gear setting for drill motor:
Optimum core bit diameter
-(1st gear 6 in 12 in)
-(2nd gear 3 1/4 in - 6 in)
-(3rd gear 1 3/8 in - 3 1/4 in)
-(4th gear 1/2 in - 1 3/8 in)
BE SURE TO TELL CUSTOMER TO REMOVE GRAY RUBBER GASKET WHILE TRANSPORTING DRILL
VACUUM GASGET SEAL PART # 279660
VACUUM BASE 27 1/2" LONG
ANCHOR BASE 17 1/2" LONG

Also check the following item(s) related to the above:

DRILL, WRENCH FOR CORE DRILL

WATER HOSE CONNECTION

HOSES,GARDEN 50'

CORDS,EXTENSION(50'-10GAUGE)

VACUUM HILTI FOR CORE DRILLS

* Please call us for any questions on our drill hilti core w/vac. pump rentals Tulsa OK and neighboring communities in Northeastern Oklahoma.