• 2910 East 15th Street, Tulsa, OK 74104
  • Visit us on Facebook

LAWN/GARDEN EQUIPMENT

GRINDER, 31hp STUMP TRACK HYD. BARRETO

Manufacturer Link: <Click Here>
Where to find GRINDER, 31hp STUMP TRACK HYD. BARRETO in Tulsa

Image for reference only
Actual item may look different
Click on image for larger view

Click on above thumbnails for alternate view

Manufacturer: BARRETO
Model: 30SGB
4 Hour: $189.00
Daily: $297.00
Weekly: $1,622.00
Monthly: $6,489.00
Instructions: <Click Here>
Comments:
  • The 30SG stump grinder features a time-tested track drive platform. The 30SG has a hydraulically-driven cutter wheel that is raised and lowered into the stump and then moved from side to side to cut down. The 30SG is powered by a 31hp Briggs & Stratton Vanguard V-Twin engine. The engine is coupled to two gear pumps: the larger gear pump drives the cutter wheel and the smaller pump works the tilt and swing cylinders. The tracks are driven by independent hydrostatic pumps mounted on the rear of the engine for easy access and simple linkage control. Counterbalance valves on each track drive prevent the track motors from slipping while the cutter wheel is engaged in the cutting process, even while operating on a slope.
  • CONTROLS
  • The cutter wheel operation and articulating arm are operated by controls mounted on the console. The cutter wheel is activated by a switch on the control stick and has a secondary safety switch to prevent accidental engagement. Back and forth movement across the stump, as well as depth of cut, are easily controlled by handles on the console, allowing for carefully controlled movement of the cutter wheel as it reduces the stump to chips.
  • SPECIFICATIONS
  • ENGINE: GASOLINE
  • Briggs & Stratton Vanguard V-Twin 31hp
  • DETAILS:
  • Weight: 1,700 lb
  • Height: 49.5
  • Length (head to side): 79
  • Length (head straight): 98
  • Width: 35.5
  • Gas Tank Capacity: 5 gallon
  • Hydraulic Reservoir: 14 gallons
  • Hydraulic Flow to Head: 13.3gpm
  • Track Width: 7.1
  • Total Ground Contact: 470 sq. in.
  • Ground Drive Forward: 290 ft/min
  • Ground Drive Reverse: 180 ft/min
  • CUTTER WHEEL SPECIFICATIONS
  • Cutting Wheel: 19.2 diameter to tooth
  • Cutting Teeth: 0.750 thick, 16 green teeth
  • Cutting Depth: 12
  • Cutting Height: 32
  • Head Swing: 134 , 99.7 arc
  • FEATURES
  • Easy controls operate the track drive and cutter wheel
  • Time-tested track design absorbs impact and provides stability
  • Center-mounted cutter wheel provides 134 head swing
  • Gear pumps coupled to the engine drive the cutter wheel, tilt, and swing
  • Counterbalance valves on each track drive prevent motors from slipping

* Please call us with any questions about our grinder 31hp stump track hyd. barreto rentals in Tulsa OK and neighboring communities in Northeastern Oklahoma.