FORKLIFT / TELEHANDLER / HOIST / JACKS/

TELEHANDLER, 10K SKYJACK REACH FORKLIFT


	Image for reference only Actual item may look different Click on image for larger view Click on above thumbnails for alternate view

Manufacturer: SKYJACK

Model: SJ1056TH

Daily: $784.00

Weekly: $1,800.00

Monthly: $3,999.00

Instructions: <Click Here>

Comments:

Skyjack telehandlers extend our principle of simple reliability into material handling equipment. Our TH series is designed with all major service points easily accessible, limiting downtime and increasing our customers s utilization.
Lift capacity varies greatly depending on load center depending on how high and how far horizontally when boom is extend, and if outriggers are up or down. Operator should always know weight of material/special attachments and verify the machines capacities to ensure safety at all times. Death and injuries may occur if not operated with in proper specification.
SPECS
Overall Width - 8 5 (2.56 m)
Ground Clearance - 19 (48.3 cm)
Turning Radius (Outside) - 153 (3.89 m)
Fuel Tank - 35 gal. (132 L)
Hydraulic Reservoir - 43.85 gal. (166 L)
Maximum Lift Capacity - 10,000 lbs
Rated Lift Capacity @ Maximum Height (outriggers up) 4,000 lbs
Rated Lift Capacity @ Maximum Reach (outriggers up) 400 lbs
Rated Lift Capacity @ Maximum Height (outriggers down) 6,000 lbs
Rated Lift Capacity @ Maximum Reach (outriggers down) 3,000 lbs
Maximum Lift Height - 56 3 (17.14 m)
Maximum Forward Reach - 42 6
O/A Length - Less Forks 22 2
Overall Height - Stowed 8 1
Operating Weight - 33,336 lbs
Engine 74hp / 287 lb-ft Deutz TCD 3.6L T4F
Max Travel Speed Forward 15 mph (24 km/h)
Transmission Dana Powershift, 3 Speeds F/R
Axles Dana
Steering - 3 mode (Front Wheel, 4 Wheel, Crab)
Drawbar Pull 20,000 lbs
STANDARD FEATURES
10,000 lbs (4,535 kg) Maximum lift capacity
DPF & DEF Free Tier 4 Final 74hp / 221 lb-ft Deutz TCD 3.6L engine
20,000 lbs Drawbar pull
3-Speed Dana powershift transmission & Dana axles
Yoke-mounted lifting hook
48 Quick attach, floating pin carriage
Pallet forks, 2.36 x 4 x 48 , 10,000 lbs cap.
Axle mount outriggers (SJ1056 TH only)
Auxiliary hydraulics
Engine block heater
Quick attach carriage mount
Side window
Suspension seat
Single multifunction pilot operated joystick control
In-cab engine multifunction display
Hydraulic test ports
Lockable in-cab storage box
Rear towing hitch pin
Steel engine cowling
Steel component and access cover

* Please call us with any questions about our telehandler 10k skyjack reach forklift rentals in Tulsa OK and neighboring communities in Northeastern Oklahoma.